Tabla de contenido
2.12
Operator's obligations
3
Transport and storage
3.1
Delivery
3.2
Transport
Fig. 1: Attachment point
Installation and operating instructions Wilo-EMU TR/TRE 216 ... 326-3
Transport and storage
ƒ
Provide the installation and operating instructions in a language that personnel can un-
derstand.
ƒ
Ensure the required level of personnel training for the specified work.
ƒ
Provide protective equipment. Ensure that personnel wear the protective equipment.
ƒ
Ensure that the attached safety and information signs on the product are always legible.
ƒ
Instruct personnel on how the system operates.
ƒ
Fit dangerous components within the system with an on-site guard.
ƒ
Secure and demarcate the working area.
ƒ
Measure the noise level. At noise levels of 85 dB(A) and over, wear hearing protection.
Demarcate the working area!
ƒ
After receiving the shipment, check it immediately for defects (damage, completeness).
ƒ
Document any defects on the freight documentation!
ƒ
Defects must be notified to the transport company or the manufacturer on the day of re-
ceipt of shipment.
ƒ
Claims reported after this date can no longer be invoked.
NOTICE
Transporting mixers without attachment points
Mixers for ground and wall fixation have no in-built frame and therefore no attachment
point. Transport the mixer on the pallet to the installation site. Have one or two persons
position the mixer at the installation site. Remember the weight of the mixer!
ƒ
Wear protective equipment! Observe the work regulations.
–
Protective gloves: 4X42C (uvex C500)
–
Safety shoes: Protection class S1 (uvex 1 sport S1)
ƒ
Attach the mixer to the attachment point!
ƒ
Protect the connection cable against water ingress.
ƒ
Only remove the outer packaging at the place of utilization to ensure that the mixer is
not damaged during transport.
ƒ
Pack used mixers for shipping in tear-proof plastic bags of sufficient size so that they are
leakproof.
en-US
11
Capítulos
Tabla de contenido
