Installation, Service And Repair - Mettler Toledo PUA Serie Manual Del Usuario

1
2
A
3
2
30290730C PUA-series
5. Hang out the access ramp (1) and put aside or respectively pull out the Rampfix
under the weighing platform.
6. Tilt the drawbar (2) forwards and move the scale
3.5.3 Establishing the weighing mode
1. Tilt the drawbar downwards onto the weighing platform.
2. Start at roller box 4.
3. Unbolt the lock (A) with one hand and keep it pulled out.
B
4. Use the other hand to tilt the lever (B) upwards until the lock latches in again.
5. Proceed at roller boxes 3 to 1 as described in steps 2 and 3.
6. Check whether the weighing platform is positioned correctly.
4
7. Check the level of the weighing platform.
1

3.6 Installation, service and repair

➜ For installation, configuration, service and repair of the weighing platforms call the
METTLER TOLEDO Service.
11
Operation