Leica Geosystems KL122 Manual De Empleo página 30

1. Connect charger.
2. Connect battery.
3. Ensure that the battery lamp is
3
showing a continuous green light.
The battery is now being charged.
If the battery lamp gives another
23
signal after the battery has been
connected, see "Illuminated Dis-
play".
4. The battery is fully charged when
the battery lamp flashes green (for
charge time ref. to "Technical
Data"; eg. for GEB121 after 2.5 to
3.5 h).
5. The battery can now be removed
for use or it may remain connected
so that it is available when
required.
If more than one battery is connected
to the charger, they are charged in
the order that they have been
connected. For this reason, connect
the battery that is most urgently
needed so that it has priority for
charging.
30
Batteries which can be charged
quickly (GEB111, GEB121 and all
Leica batteries with 5-pin charging
plugs) always take priority before nor-
mal chargeable batteries (Leica
batteries with 3-pin charging plugs).
Charging on the other hand is always
carried out before discharging.