INSTRUCTIONS FOR USE
Arm Sleeve Connector
Remove the Arm Sleeve Connector by loosening the top blue section of the
connector (clockwise). Once the hook is loose remove the connector.
Suspension Tower:
To collapse the Tower first
ensure that the pulley
carriage is in the Home
position (Figure 25).
Once the pulley carriage is
in the bottom Home
position pull down on the
handle at the end of the
Tower to release the lock.
Allow the top of the Tower
to slide back towards the
operator until the kickstand
disengages (Figure 26).
Document Number: D-720764
Version: C
Page 32
Figure 25
Figure 26
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E