Arthrex AR-1650S Instrucciones De Uso página 17

INSTRUCTIONS FOR USE
Mount Clamp to the rail by sliding it on the distal end of the rail. Typically, the Clamp
is placed on the contralateral side of the patient but it is not required. It is
recommended for most tables and patients that the clamp be pulled back to
engage the rail gravity lock. Secure the Table Clamp to the rails by tightening the
two wing knobs on the Clamp body (Figure 1).
Lift the lever, move it approximately to center and push the lever down (Figure 2).
Adjusting the lever forward or backward will adjust the angle of the Tower relative
to the OR table. It is recommended that the starting orientation is perpendicular to
the rail in order to mount the Tower parallel with the patient, but it is not required.
Document Number: D-720764
Version: C
Figure 1
Figure 2
Page 17
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E