Philips HR6835/01 Manual De Instrucciones página 12

your Double Injection nozzle employs three
58
familiair cleaning tools:
a brush (to release sticking dirt from the floor);
a sponge (to spread out and rub in the
shampoo);
a squeegee (to
collect the used
shampoo from the
floor so that it can be
vacuumed).
• Do not make your
strokes too long.
• For effective scrubbing
just move the nozzle
forward and
backwards (fig. 58) as you would do with a
vacuum cleaner.
Normally, it is
sufficient to apply
shampoo only while
moving the nozzle
forwards.
• To dry the floor just
move the nozzle
backwards slowly.
Make sure that now
only the squeegee
touches the floor and do not apply shampoo
(fig. 59).
61
The wet sponge will inevitably leave a little water
where the floor is uneven. This will soon
evaporate.
• For most effective shampoo removal we suggest
59
60
1 2 3 4 5
6
62
you to follow the illustrated pattern (fig. 60).
Please note the overlapping lanes and the
cross-lane at the end.
Shampooing:
upholstery, tapestry
- Attach the upholstery
nozzle directly to the
handgrip (fig. 61).
• This nozzle is very
convenient for
shampooing furniture,
tapistry, curtains, etc. (fig. 62).
64
Cleaning and maintenance
- Switch off. Remove the mains plug from the wall
socket.
- All parts of the appliance, including the
container, may be cleaned with a damp cloth
66
and if required some detergent. However,
ensure that no water enters the motor part!
- Rinse the float unit with foam filter (fig. 63).
To guarantee optimum life time of your foam
filter, it is advisable to carefully remove it from
the float unit (fig. 64) and handwash the filter
12
63
65
67