Tabla de contenido
USING YOUR APPLIANCE
• Moisten the seal (C3) and position
it correctly onto the blade unit
(C1).
• Place the assembly (C1+C3) on
the base of the jug (C4). Lock it
by rotating the blade unit through
a quarter turn in the anticlockwise
direction. (Fig. 2).
• Place the ingredients into the
assembled jug without exceeding
the maximum level indicated:
* 1,75 litres
• Fit the lid (C5) on the jug. Place the
measuring cap (C6) in its recess
on the lid.
• Place the blender jug assembly
(C) on the motor unit (A).
• Make sure that the appliance has
been switched off and position
the jug on the motor unit so that
the notches of the jug engage
with the grooves on the motor unit.
Check that the jug is positioned
horizontally and the appliance
is on a flat, stable, heat-resistant
surface away from sources of heat
or water splashes.
• The blender motor runs the blades
at high speed in order to ensure
thorough mixing. Consequently,
it is important that the blender is
always placed on a flat, dry surface
before it is operated. Check that
the jug is positioned correctly on
the motor unit. If not, the blender
will not operate.
• Never use the blender for more
than 3 minutes at a time. Let the
blender rest for 1 minute before you
operate it again (in order to avoid
overheating).
Caution: leaks can occur if the
jug is not locked correctly.
• Plug in the appliance and turn the
function selector to "program",
and the indicator lights of the on/
off button and the function buttons
start flashing. Choose the optional
program function by means of the
buttons "ice crush", "smoothie" or
"auto-clean". Each function has
a programed processing time
(see more under the different
functions), but blending can be
stopped manually by pressing the
on/off button in the middle of the
function selector. The blender also
has a variable speed selector that
is activated by turning the function
button to setting min-max.
• Your appliance is equipped with
a thermal cut-out. In case of
overheating your appliance will turn
off automatically. Disconnect the
appliance and let it cool down for
about 30 minutes, then resume use.
Functions of the blender:
Ice crush: Put max 200 g of ice
cubes in the jug. The blender works
in pulse intervals for approx. 1 minute
unless it is switched off manually by
means of the on/off button or by
pressing the ice crush button.
Smoothie: The blender works at
various speeds alternating for
approx. 1 minute unless it is switched
off manually by means of the on/ off
button or by pressing the smoothie
button.
Auto Clean: This function allows
you to clean the jug. Add 1250ml of
warm water and a drop of washing
up liquid inside the blender jug. Press
Autoclean button.
The blender works at various speeds
alternating for 45 seconds, unless it is
switched off manually by means of
the on/off button or by pressing the
Autoclean button again. Then rinse
thoroughly.
67
EN
Tabla de contenido
