Yamaha FJR1300 Manual De Montaje página 78

Part to be tightened
Left rider footrest bracket and frame
Left rider footrest bracket and engine
Left rider footrest bracket, sidestand bracket, and
frame
Ring gear bearing housing and final drive housing
Ring gear bearing housing and final drive housing
Stopper bolt
Gear coupling and final drive pinion gear
Final drive pinion gear bearing retainer
Sidestand and sidestand bracket
Centerstand bracket and frame
Centerstand and centerstand bracket
Rear frame and main frame (upper)
Rear frame and main frame (lower)
T-bar and frame
Fuel pump and fuel tank
Battery bracket and frame
Battery holder and battery bracket
Ignition coil
NOTE:
1. First, tighten the lower ring nut 52 Nm (5.2 m • kg, 37 ft • lb) using a torque wrench, then loosen the
lower ring nut completely.
2. Retighten the lower ring nut to specification.
Thread size
M8
M10
M10
M10
M8
M10
M16
M65
M10
M10
M10
M8
M10
M10
M5
M6
M6
M6
–71–
Tightening torque
Nm m • kg
28 2.8
49 4.9
63 6.3
40 4.0
23 2.3
9 0.9
110 11.0
110 11.0
58 5.8
55 5.5
56 5.6
28 2.8
48 4.8
78 7.8
4 0.4
10 1.0
10 1.0
10 1.0