Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GB
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
WHEELED GUIDE SHAFT FOR TRIMMER
52G312
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL
CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
Wheeled guide shaft for trimmer is an accessory piece for grass
trimmer. When using guide shaft with grass trimmer please observe
safety rules for trimmer operation and general safety rules.
Before using wheeled guide shaft with trimmer read this manual and
the trimmer manual. Follow information therein.
For safe use, observe symbols that are placed on the product and
explained in this manual.
Guide shaft can be used only for the trimmer with attached grass
blade. Do not use guide shaft for trimmer with hedge blade
attached.
Explanation of used symbols.
1
2
!
6
7
1.
Read all safety instructions.
2.
Protect the tool against rain.
3.
Always wear safety glasses when working.
4.
Pay attention to projected objects when working.
5.
Keep safe distance from the tool when working.
6.
Caution.
7.
Keep safe distance from power lines.
8.
Caution: cutting blade works for some time after switching off
the garden tool.
CONSTRUCTION AND USE
Grass trimmer guide shaft is an accessory equipment that allows
for comfortable operation when cutting grass with the trimmer.
When trimmer is attached to guide shaft, off/on switching function
is transferred to the switch located on the shaft. Shaft height is
adjustable in range approx. 90–110 cm.
When using the guide shaft you can work in straight standing position
without operating the trimmer directly in your hand.
It can be used for cutting grass under bushes, trimming grass at lawn
edges etc. Additionally you can rotate the trimmer in fixing attachment
to use the tool in vertical position and cut lawn edge.
Use the guide shaft according to the manufacturer's instructions
only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the
drawing pages of this manual.
1.
Switch lock button
2.
Switch
3.
Handle
4.
Fixed shaft section
5.
Locking ring
6.
Telescopic shaft section
3
4
5
8
7.
Trimmer connector
8.
Wheels
9.
Trimmer attachment holder
10.
Trimmer socket
11.
Locking button
* Differences may appear between the product and drawing.
** Trimmer shown on pictures is not delivered with the wheeled guide shaft VERTO
52G312. It is available for purchase separately.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY / SETTINGS
INFORMATION
PREPARATION FOR OPERATION
Guide shaft for grass trimmer 52G312 can be used with the
following VERTO tools: 52G310, 52G311.
INSTALLATION OF GUIDE SHAFT
Remove rubber cap from fixed shaft section ( 4) at the cord outlet.
Insert telescopic shaft section ( 6) into fixed shaft section (4).
Undo the locking ring ( 5) and slide the part with visible thread onto
fixed shaft section so it snaps in. When doing so, align key with
notch in shaft.
Tighten the locking ring ( 5).
ATTACHING GRASS TRIMMER TO GUIDE SHAFT
Slide the grass trimmer into trimmer attachment holder ( 9) in
the guide shaft until it locks (fig. A). Protrusions in the trimmer
attachment holder must be aligned with groove in the bottom of
the trimmer.
Connect trimmer connector ( 7) to trimmer socket (10) (fig. B).
Check correct operation of the switch before use. Switching on/off
is explained in section OPERATION/SETTINGS.
Trimmer and guide shaft disassembly is reversed assembly
procedure.
Guide shaft can be used only for the trimmer with attached grass
blade. Do not use guide shaft for trimmer with hedge blade
attached.
OPERATION / SETTINGS
SWITCHING ON / SWITCHING OFF
Wheeled guide shaft for trimmer is equipped with button that
protects against accidental starting.
Press the switch lock button ( 1) (fig. C).
Press the switch button ( 2) (fig. C).
Release pressure on the switch button ( 2) to stop the tool.
8
Tabla de contenido
