Pramac Pmi3000 Manual Del Operador página 15

 Make sure the equipment is in good condition before connecting with the generator.
If the equipment is not running normally (low speed or sudden shutdown), you should
switch off the engine, then disconnect the equipment and repair according to detail fault.
5.2 Output and overload indication, oil level indication
The output indicator light (green) is on under normal operation condition.
The output indicator light (green) will be off if the generator overloads or short circuit occurs in
the connected equipment, and the overload indicator light (red) will be on, the power of the
connected equipment will be cut off.
If the red light is on, you should turn off the engine to check the cause.
If the engine oil level light is on, you should check whether it should be refilled.
1 – Run
2 – Overload
3 - Low oil
 Before connected to the generator, check the equipment status whether the
registration power exceeds the generator. Then connect the equipment cable, start the
engine.
12