Uline VACMASTER H-9461 Manual Del Usuario página 4

1. Verify that the power cord is
disconnected from the outlet.
(See Figure 1)
2. Undo the latches. (See Figure 2)
3. Lift the power head off collection
tank. (See Figure 3)
4. Remove contents from inside the
collection tank and ensure all
contents are present.
(See Figure 4)
NOTE: Vacuum comes ready
for dry vacuum cleaning.
5. Place filter retainer on top of
cartridge filter over the raised
lip and tighten down by turning
retainer clockwise. Do not
overtighten. (See Figures 5-6)
PAGE 4 OF 30
ASSEMBLY
6. Optional: For improved dust
Figure 1
7.
Figure 2
8. Place power head back on tank.
Figure 3
9. Position the hose storage rack as
Figure 4
Figure 5
10. Align top section of power head
Figure 6
filtering, fit collection bag flange
onto the inlet port, taking care
not to damage the bag. Dust
bag sold separately.
(See Figure 7)
Optional: For wet vacuum
cleaning, remove the cartridge
filter and replace with the
supplied foam wet filter.
(See Figure 8)
(See Figure 9)
illustrated in Figure 10. Insert one
side of the rack into the channel
ensuring it is secured in place.
Squeeze in the other end and
insert it into the corresponding
channel ensuring it is secured.
(See Figures 10-11)
with the latches, and snap into
place. (See Figure 12)
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
1
2
0821 IH-9461