Tabla de contenido
14.1
15.1
Silver Cross Aston Martin Instructions 2019.indd 11
Attaching the seat unit to
your chassis
WARNING: Ensure all locking devices
are engaged before use.
14.1
To attach your seat unit to the chassis hold
the seat unit above the chassis. Locate the
seat unit chassis connector onto the seat
attachment post of the chassis. Ensure the
seat unit 'clicks' into place. The seat unit can
be fitted forward or rearward facing. Lift the
seat unit gently by the bumper bar to check
the seat has locked into place.
To adjust the seat position (see point
Detaching the seat unit
from your chassis
15.1
With the seat unit facing you press the
red release button first located on the side
of the seat unit until it clicks into place.
WARNING: This button is now
unlocked. It will re-lock automatically
when the seat is re-attached to the
chassis.
Then while pressing and holding the other
black release button on the opposite side
of the seat unit, lift the seat unit from the
chassis using the bumper bar.
WARNING: Always ensure your
bumper bar is attached when your
child is in the seat unit.
The seat unit will now lift clear of the
chassis.
Note: Remove the child from the
seat unit before detaching from
your chassis.
22.1
).
11
16/01/2019 09:59
Tabla de contenido
