Filter Installation - Taurus 944845 Manual

ENGLISH MANUAL
Dear customer,
Many thanks for choosing to purchase a TAURUS
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long
product life can be assured.
READ CAREFULLY BEFORE ATTEMPTING TO
ASSEMBLE, INSTALL, OPERATE OR MAINTAIN
THE PRODUCT DESCRIBED. PROTECT
YOURSELF AND.OTHER BY OBSERVING ALL
SAFETY INFORMATION. FAILURE TO COMPLY
WITH INSTRUCTIONS COULD RESULT IN
PERSONAL INJURY AND/OR PROPERTY
DAMAGE!
Important safety information
1. Read all safety guidelines carefully before
using the FAN.
2. Please follow the guidelines of the manual to use this FAN, otherwise, it may cause fire,
electrical shock or injury to persons.
3. Open the package and ensure that the Fan is
undamaged. In case of doubt do not use the
FAN and contact your supplier.
4. Do not let children play with packing materials.
5. Before using the FAN, check if the voltage
marked on the rating label corresponds to the
mains at your home.
6. This Fan should not be operated by invalids,
children and the inexperienced person without
instruction from their guardians.
7. Children should not be allowed to play
with this Fan.
8. Avoid using extension cord as it may
overheat and cause fire.
9. Do not pull the power cord to disconnect from
power source. Always grasp the plug
to pull out.
10. Avoiding inserting any objects into the Fan as it
may cause an electric shock or damage to the
Fan. Do not block or tamper with the Fan in any
manner while it is in operation.
11. This Fan is intended for household use ONLY
and not for industrial or outdoor use.
12. Do not leave the Fan unattended. Always
unplug the Fan when not in use.
13. WARNING: The On / Off switch should not
be used as the sole means of disconnecting
power. Always unplug the power cord before
servicing or moving the unit.
14. Always disconnected the Fan from the power
supply when moving it from one
location to another.
15. The Fan is not intended for use in wet or damp
locations. Never locate the Fan where it may
fall into a bathtub or other water container.
16. Do not place the Fan near a source of
heat or fire.
17. Keep the Fan clean to maintain in good
condition(refer to maintenance
section for details).
18. WARNING: Unplug the Fan before cleaning.
If the power cord is damaged, it must be
replaced and repaired by authorized
service agent.
Main Body

Filter installation

1. Insert the filter to the grid.
2. Fix it by 2 screws.
Operation:
The Fan may be operated by the control panel
located on top of the Fan (as shown in Figure 1) or
by your remote control.
1. Place the Fan on a stable and flat surface. Plug
the Power Cord into an AC 220-240V electrical
outlet. The LED screen will display the current
room temperature.
2. POWER: Turn the Fan ON by pressing the
button, the fan will start at low speed.
3. SPEED: Adjust the Fan speed to the desired
level: 1, 2, 3, 4, 5 or 6 by pressing
The speed setting is displayed
on the LED screen.
button.