Specifications; Electrical Specifications - SCANMASKIN SCAN COMBIFLEX 450 Standard Manual Del Usuario

1

Specifications

The SC-450 is available with different power inputs. This is described in the different sections lat-
er on in this chapter.
1.1

Electrical specifications

To find the specifications that apply to your machine, check the information plate on the ma-
chine.
Never connect the SC-450 to any other voltage or number of phases than de-
scribed in this specification.
The power source must be fused according to "External fuse" in this specification;
also the cables used must be marked and rated in accordance with the fuse used.
Failure to comply with the correct fuses may cause fire or injuries.
Power choice
1
Power
Current
Voltage
Frequency
External fuse
3
Power inlet
4
Table 11 Electrical specifications
All models are CE-marked.
If using a generator see "2.6.2 Using a generator"
1 This refers to different power choices. Note that a SC-450 made for one choice of power must be used
with the particular choice.
2
Standard
Maximum current for the fuses used in the power source (i.e. the distribution box).
3
4 This is the standard inlet used. Machines sold outside of EU will be shipped either with a local standard
inlet or an adapter.
42
230 V 1~ 230 V NS
2
1.5 kW (2 hp) 2.2 kW (3 hp)
8.7 A 12.9 A
200 – 240 V 1~ 200 – 240 V 1~
50 Hz +/- 5% 50 Hz +/- 5%
10 A 13 A
CEE 7/7 – 250V CEE 7/7 – 250V
16A + PE 16A + PE
110 V 1~
1.5 kW (2 hp)
18.5 A
100 – 130 V 1~
60 Hz +/- 5%
20 A
NEMA 5-20 –
125V 20A + PE
www.scanmaskin.com