Maintenance; Precautions; Daily Inspection Prior To Operation; Maintenance And Inspection List - SCANMASKIN SCAN COMBIFLEX 450 Standard Manual Del Usuario

5

Maintenance

5.1

Precautions

Set the machine into the Safety off position before beginning any work on the machine.
See "2.7 Definition of the "Safety off position"".
Read "2.6 Electrical safety" before beginning any maintenance work.
Never work on the machine while power is still connected!
All parts must have come to a complete stop before beginning any work!
When the machine is lying down on its back it might tilt to it's upwards position. Take extra
care to prevent this from happening to ensure that no injuries or damages occur.
When the machine has been operated the segments, Scan-On plates and other parts on the
gear barrel may be hot. Take extra care to prevent burn injuries.
Adjustment, maintenance and inspection work must be undertaken by qualified personnel.
The machine must not be connected to any power source while cleaning.
5.2

Daily inspection prior to operation

Inspect the following items prior to operation
 Inspect the wheels for damage.
 Inspect the grinding discs and hubs.
 Inspect the grinding head, dirt between the Scan-On plate and the grinding hub may
lower the flexibility of the grinding head.
 If any screws appear loose, tighten them.
 Look over the machine for any other damage.
5.3

Maintenance and inspection list

Daily
12 hours after ser-
vice
62
 Inspect the wheels
 Inspect the grinding heads
 Look for any other damage
 Tighten all screws
www.scanmaskin.com