Stop The Sc-450 Ns; Grinding Speed Sc 450Ns; Rotation Direction Sc-450 Ns; Safety Off Position - SCANMASKIN SCAN COMBIFLEX 450 Standard Manual Del Usuario

The machine is now ready to be started again.
4.9 Stop the SC 450 NS
How to stop the SC 450NS machine
 Press the "STOP" button.
 Wait for the machine to come to a complete stop before letting go of the handle.
 Turn off the dust collector if used.
4.10

Grinding speed SC 450NS

Use the "SPEED" dial to adjust the rotation speed of the grinding discs between the intervals
described in chapter 1.
4.11

Rotation direction SC-450 NS

Use the "L/R" switch to change direction of the grinding discs. The machine will first do a soft
stop then a soft start.
4.12

Safety off position

When working on the machine, maintenance or tool change, the machine must be set to the
"Safety off position". See "2.7 Definition of the "Safety off position"" for further information.
4.13

Grinding

Refer to "Grinding guide" for instructions and information about grinding.
4.14

Changing tools

Before changing tools, read "2.8 Safety regarding maintenance".
This illustration shows how to change the tools.
60
www.scanmaskin.com