Control Device Sc-450; Start Up - SCANMASKIN SCAN COMBIFLEX 450 Standard Manual Del Usuario

SCAN COMBIFLEX 450/450NS
Figure 41 Illustrates the rotation of the grinding heads versus the gear barrel.
The machine is equipped with a thermal protection circuit that will shut down the machine in
the event of high motor temperature. Wait at least 15 minutes before operating the machine
again if this occurs.
4.3

Control device SC-450

1 2
Figure 42
SC-450 control device
Item Function
1 Stop
2 Start
Table 41 Description of control device
4.4

Start up

See"4.1 Precautions" before starting the machine.
How to start the machine
 Make sure that the machine is equipped with the right "Scan on" tools.
www.scanmaskin.com
Description
Stops the SC-450
Starts the SC-450
ENGLISH
57