Hot Surface; Requirements - Wilo Yonos MAXO Instrucciones De Instalación Y Funcionamiento

en
DANGER
Risk of fatal injury!
Incorrect electrical connection can cause fatal elec-
tric shocks!
Follow the detailed instructions for the pump series
Yonos MAXO (plus), Yonos MAXO-D or Yonos MAXO-
Z (plus) online:
www.wilo.com/yonos-maxo-plus/om
www.wilo.com/yonos-maxo/om
WARNING

Hot surface!

The entire pump can become very hot. There is a risk
of burns!
ƒ
Allow the pump to cool down before commencing any work!
22
7.1

Requirements

DANGER
Risk of fatal electrical shock!
• Immediate risk of fatal injury if live components are
touched!
• Failure to install safety devices (e.g. module cover
of the Wilo-Connect module Yonos MAXO) can cause
electric shock, potentially resulting in life-threaten-
ing injuries!
• Even if the Wilo-Connect module Yonos MAXO run
signal light is not illuminated, voltage may be
present!
• If setting and operating elements are improperly re-
moved from the Wilo-Connect module Yonos MAXO,
there is a danger of electric shock if interior electrical
components are touched!
• Applying an incorrect voltage to interfaces will re-
sult in incorrect voltage in all pumps and on-site
building automation devices that are connected to
the interface.
ƒ
Before all work, deactivate the power supply (if necessary, SSM,
SBM and twin-head pump management) and safeguard against
accidental switch-on!
ƒ
Never operate the Wilo-Connect module Yonos MAXO without
the module cover closed!
ƒ
Only operate the pump and Wilo-Connect module Yonos MAXO
with intact components and connection cables.
WILO SE 2020-04