Chapter 2 Configuring The Device; Accessing The Device; Using The Webui - Juniper Networks NetScreen-5GT Wireless Manual Del Usuario

Chapter 2
Configuring the Device
This chapter describes how to configure a NetScreen-5GT Wireless device after you have
connected it to your network. If you are accessing the device for the first time using the
ScreenOS WebUI graphical interface, then you can use the Initial Configuration Wizard
to guide you through the basic configuration. To use this wizard, refer to the Juniper
Networks NetScreen-5GT Wireless Getting Started Guide or the Juniper Networks
NetScreen-5GT Wireless ADSL Getting Started Guide.
Topics explained in this chapter include:
•

Accessing the Device

• Required Configuration
• Wireless Configuration
• ADSL Configuration
• Optional Configuration
• Verifying External Connectivity
• Resetting the Device to Factory Defaults
Note: After you configure the NetScreen device and verify connectivity to the Internet, you
must register your product at
services, such as internal antivirus or Deep Inspection Signature Service, can be activated
on the device. After registering your product, use the WebUI to obtain the subscription for
the service. For more information about registering your product and obtaining
subscriptions for specific services, see the "System Parameters" chapter in the
"Fundamentals" volume of the NetScreen Concepts & Examples ScreenOS Reference
Guide for ScreenOS 5.0.0.
A
CCESSING THE
This section describes how to access your NetScreen device using the WebUI, Telnet, or a
Console connection.

Using the WebUI

The ScreenOS WebUI is a graphical interface that is available through a web browser. To
use the WebUI, you must be on the same subnetwork as the Trust or wireless2 interface.
To access the NetScreen-5GT Wireless device with the WebUI management application:
1. Launch your browser, enter the IP address for the Trust or wireless2 interface in
the URL field, and press Enter. For example, enter the following in the URL
field:
NetScreen-5GT Wireless
www.juniper.net/support/
D
EVICE
192.168.1.1
so that certain ScreenOS
2
13