Connecting The Power; Rack Mounting (Optional) - Juniper Networks NetScreen-5GT Wireless Manual Del Usuario

Chapter 1 Connecting the Device
C
ONNECTING THE
To connect the power to the NetScreen-5GT Wireless device:
1. Plug the DC connector end of the power cable into the DC power receptacle on
the back of the device.
2. Plug the AC adapter end of the power cable into an AC power source.
Warning: We recommend using a surge protector for the power connection.
R M
ACK OUNTING
With a NetScreen-5GT Wireless rack-mount kit, you can mount one or two NetScreen-
5GT Wireless devices in a standard 19-inch equipment rack. The NetScreen-5GT Wireless
rack-mount kit includes installation instructions and a rack-mounting tray. The
dimensions of the tray are as follows:
In addition to the NetScreen-5GT Wireless device(s), rack-mount kit, and equipment rack,
you will need the following:
• Phillips-head screwdriver
• Four screws that match the thread size of the equipment rack
To mount the device in a rack:
1. Use the Phillips-head screwdriver to remove the two screws from the underside
of each NetScreen-5GT Wireless device that you intend to mount. (Keep the
screws for use in the next step.) The screws are located on the underside of the
device near the front panel.
2. Insert each device on the rack-mount tray and attach it to the tray with the
screws that you removed in step 1.
10
P
OWER
(O
PTIONAL
Width: 48.26 cm.
Height: 4.013 cm.
Depth: 33.655 cm.
)
19 in.
1-5/8 in. (1 rack unit)
13-1/4 in.
User's Guide