Roca ATAI Montaje Y Uso página 20

FITTING A NEW SWIVELLING NOZZLE AND CLEANING THE SEALS : (Fig. D)
Undo the vertical pipe -18- remove the O ring -17- the anti-friction ring -16- lift off the
nozzle -15- and the anti-friction ring -14-. WARNING the "GACO" lip seals -13- are
very delicate, therefore do not attempt to remove them unless you have replace-
ments. Limit your intervention to cleaning them and adding a thin layer of grease. To
re-assemble, proceed in reverse order making sure that everything is put back pro-
perly, be careful also (if fitting new parts) to position the seals -13- as shown in fig.C.
On completion, before fitting the sink, check that the nozzle is able to swivel freely.
FITTING A NEW AERATOR:
To remove the aerator -19- undo the ring nut -19.3- and clean the filter -19.2- from
any impurities, refit the aerator in reverse order making sure that the seal -19.1- is
positioned correctly.
19