YATO YT-07190 PL Manual Original página 11

PRODUCT OVERVIEW
The oil drain and evacuator allows for quick, effi cient and safe removal and collection of consumable fl uids in the form of engine
oil, transmission oil, etc. from vehicles and other machines equipped with a combustion engine. The product is not used to collect
fl ammable liquids, e.g. petrol, solvents, diesel, alcohol, etc. and corrosive liquids, e.g. brake fl uid. The correct, reliable and safe
operation of the product depends on its proper use, therefore:
Read and keep the entire Manual before the fi rst use of the tool.
The supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.
ACCESSORIES
The product is delivered complete but requires assembly before operation. The product is delivered with probes which allow
access to consumable fl uid tanks in combustion engines.
SPECIFICATION
Parameter
Catalogue No.
Maximum extraction pressure
Recommended extraction pressure
Maximum tank-emptying pressure
Required air fl ow
Main tank capacity
Inspection tank capacity
Bowl capacity
Liquid temperature (°C)
Generated vacuum
Noise
- sound pressure
- acoustic power
Weight
GENERAL SAFETY CONDITIONS
WARNING! When operating a pneumatic tool, it is recommended that you always observe basic safety principles, including those
listed below, in order to reduce the risk of fi re, electric shock and injury.
Please read and keep the entirety of this instruction manual before using the tool.
CAUTION! Read all of the following instructions. Failure to do so may result in electric shock, fi re, or personal injury. The term
"pneumatic tool" used in these instructions refers to all tools operating by means of a compressed air stream at the correct pres-
sure.
PLEASE OBSERVE THE FOLLOWING INSTRUCTIONS
General safety conditions
Due to multiple hazards, read and understand the safety instructions before starting installation, operation, repair, maintenance
and alteration of accessories or when working in the vicinity of a pneumatic tool. Failure to do so may result in serious injury.
Pneumatic tools may only be installed, adjusted and assembled by qualifi ed and trained personnel. Do not modify the pneumatic
tool. Modifi cations can reduce effi ciency and safety and increase the risk for the tool operator. Do not throw away the safety
instructions, they should be handed over to the tool operator. Do not use the pneumatic tool if it is damaged. The employer/user
should contact the manufacturer to replace the rating plate whenever necessary.
Hazards connected with work
Use of the tool may expose the operator's body to the risk of high-pressure injections or contact with vacuum. Do not point the
tank oil outlet and the probe inlet in your direction or towards other people and animals. Do not apply the outlet or inlet to the skin.
Wear suitable gloves to protect your hands. The operator and the maintenance personnel should be physically able to cope with
O R I G I N A L
GB
Units
[MPa]
[MPa]
[MPa]
[l/min.]
[l]
[l]
[l]
[ C]
O
[MPa]
[dB(A)]
[dB(A)]
[kg]
I N S T R U C T I O N S
Value
YT-07190
0.8
0.7
0.18
150
70
10
10
40-60
0 ~ -1
101,2±3
119,8±3
20
11