ResMed C Serie Manual Del Usuario página 6

Attaching the Water Chamber
Press down the release latch on the humidifier and carefully slide the filled water
chamber onto the heater plate. The release latch springs back to hold the water
chamber in place.
Detaching the Water Chamber
1. Unplug the power cord from the power outlet and allow ten minutes for the heater
plate and any excess water to cool.
2. Detach the air tubing from the water chamber.
3. Press down the release latch on the humidifier and carefully slide the water
chamber from the humidifier base.
4. Discard any excess water.
Filling the Water Chamber
WARNING
!
Do not overfill the water chamber, as water may enter the flow generator
•
and air tubing.
Remove the water chamber from the humidifier before filling it with
•
water.
CAUTION
!
Do not use any additives (eg, scented oils and perfumes). They may reduce
the humidification output of the humidifier and/or cause deterioration of the
water chamber materials.
Carefully fill the water chamber to the maximum water level mark with distilled water
only.
Fill with distilled water only. Using distilled water will prolong the life
of your water chamber. Water from the faucet typically contains
minerals that may damage the base of your water chamber.
heater plate
release latch
3