Mounting Bracket; Rubber Gasket X; Yoke Cover; Electrical Hook-Up - Uline H-9330 Instrucciones De Montaje

5. Secure downrod in position by tightening jam
screw. Slide yoke cover down so it is flush with motor
housing. (See Figure 5)
Figure 5
Jam Screw

MOUNTING BRACKET

WARNING! To reduce the risk of fire, electric
shock or personal injury, mount to UL/CSA listed
outlet box marked acceptable for fan support
and use mounting screws provided with outlet
box.
1. Install the J-hook through center of outlet box and
into wooden joist. Secure mounting bracket and
rubber gaskets to outlet box using outlet box screws
(not provided). (See Figure 6)
Figure 6
Wooden
Outlet Box
Rubber
Gaskets
Mounting
Bracket
2. Hang the safety cable onto the J-hook. Insert top of
fan downrod into mounting bracket. (See Figure 7)
Figure 7
Mounting
Bracket
PAGE 3 OF 19
MOUNTING CONTINUED

Yoke Cover

Motor Housing
Joist
J-hook
Outlet Box
Screws
J-hook
Safety Cable
Downrod

ELECTRICAL HOOK-UP

CAUTION!
• Green Wire – Ground
• Black Wire (Fan) – Power
• White Wire (Fan) – Common
See safety precautions on page 2 before wiring.
NOTE: After making the wire connections,
ensure wires are spread apart with the
grounded conductor and the equipment-
grounding conductor on one side of outlet box
and ungrounded conductor on other side of
outlet box. Ensure the completed splices are
turned upward and pushed carefully up into
the outlet box.
CONNECTING THE (GREEN) GROUND WIRE
1. Connect ground wire from outlet box to green wire
from mounting bracket and downrod using a wire
nut (not provided). (See Figure 8)
Figure 8
Mounting
Bracket
Downrod
NOTE: Once ground wires are connected,
carefully tuck wires and wire nut into outlet
box, ensuring wires are clear of downrod when
positioned in mounting bracket.
Outlet Box
Wire Nut
0721 IH-9330