Extraordinary Maintenance; Control And Safety Elements - Lincar 700 Serie Manual De La Instalación, Uso Y Mantenimiento

Ocultar thumbs Ver también para 700 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Do not clean the appliance with direct or high-pressure jets of water and do not use metal
pads, brushes or scrapers in normal steel. If necessary, use stainless steel pads, but do not
rub them against the grain of the metal of the appliance.
Do not allow acid foods (lemon, vinegar, etc.) to remain on steel parts. Use warm soapy
water on steel surfaces and then rinse with plenty of water and dry with a soft cloth.
Maintain the shine by regular polishing with a normal liquid Polish.
Clean the grid frequently, using a wet cloth. Do not use detergents that contain chlorine
(bleach, hydrochloric acid, etc), not even in diluted form. Next, operate the grid for a few
minutes by turning the knobs to maximum to dry it as rapidly as possible. The volcanic
rock can be cleaned by plunging it into boiling water to remove accumulated grease.
Do not wash the work top or floor with hydrochloric acid.
The ash box must be checked regularly during use and must then be emptied.

3.2 Extraordinary maintenance

At regular intervals (at least once a year or more often in cases of frequent use), service
the appliance thoroughly. This includes checking the gas circuit, checking parts for
damage and if necessary lubricating the taps if they are difficult to use. Contact a
specialised and experienced technician. A maintenance contract should be taken out with
a centre approved by the company.

3.3 Control and safety elements

If the appliance is not used for a long time or if it does not work or works irregularly, the
gas stopcock upstream of the appliance must be shut off. All the parts of the appliance
that are subject to wear can easily be accessed from the front of the appliance by opening
the door or after removing the front. All the couplings use a nut and bi-cone, so great
care must be taken in handling these components. If the part is damaged during
dismantling or reassembly it must be replaced with a new one. The spare parts must be
replaced only by personnel of an authorised Customer Service Centre.
Lincar S.p.A is not responsible for damages to thing or people due to a wrong installation, appliance
tampering, improper use, bad maintenance or no observation of normative in force. If considerate
appropriate, Lincar S.p.A. reserves the right to make modifications without notice and in every moment.
Some particulars and accessories illustrated in this handbook are not mass produced item so its extra costs
are to check at contract release.
25/64
mod. G15
Tabla de contenido
loading

Este manual también es adecuado para:

900 serie900-8 serieG1500G1501G1510G1511 ... Mostrar todo

Tabla de contenido