Technical Data; Ec Declaration Of Conformity; Protecting The Environment - Black and Decker CS1825ST1 Traducido De Las Instrucciones Originales

Saw chain and guide bar
After every few hours of use and before storage, remove
u
the guide bar (7) and the saw chain (6) and clean them
thoroughly.
Make sure that the guard is clean and free from debris.
u
Oil sprocket nose and chain bar via the sprocket
u
lubrication holes (21) (fig. E). This ensures an even
distribution of wear around the guide bar rails.
Saw chain sharpening
If you are to get the best possible performance from the
tool it is important to keep the teeth of the saw chain sharp.
Guidance for this procedure is found on the sharpener
package.
Replacing worn out saw chains
Replacement saw chains are available through retailers or
Black & Decker service agents. Always use genuine spare
parts.
Saw chain sharpness
The saw chain cutters will blunt immediately if they touch the
ground or a nail while cutting.
Saw chain tension
Regularly check the saw chain tension.
What to do if your chainsaw needs repair.
What to do if your chainsaw needs repair. Your chainsaw
is manufactured in accordance with the relevant safety
requirements. Repairs should only be carried out by a
qualified person using original spare parts otherwise this may
result in considerable danger to the user. We recommend you
keep this user manual in a safe place.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
(Original instructions)

Technical data

Voltage V
DC
Bar length mm
Max bar length
mm
Chain speed (No-load) m/sm
Max cutting length mm
Oil capacity
ml
Weight kg
Batteries
Cat#
Vdc Weight
Cat# Ah
Kg Amps
BL1518 18 1.5 0.38 BL1518
BL1518ST 18 1.5 0.38 BL1518ST
BL2018 BL2018
18 2.0 0.39
BL2018ST 18 2.0 0.39 BL2018ST
BL2518 18 2.5 0.43 BL2518
BL4018 18 4.0 0.64 BL4018
BL5018 BL5018
18 5.0 0.7
BL20362 36 2.0 0.64 BL20362
BL2536 36 2.5 0.68 BL2536
BL1554 18/54 1.5 1.08 BL1554
BL2554 BL2554
18/54 2.5 1.2
*Not sold as an accessory
Guaranteed sound pressure level measured according to EN60745:
LpA (sound pressure) 79.0 dB(A), uncertainty (K) 3 dB(A)
LwA (sound power) 90.5 dB(A), uncertainty (K) 1.8 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a

EC declaration of conformity

MACHINERY DIRECTIVE
OUTDOOR NOISE DIRECTIVE
CS1825ST1, GKC1825L20, GKC1825LST, GKC1825L50 –
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60745-1:2009 +A11:2010, EN 60745-2-13:2009 +A1:2011
2006/42/EC, Chain Saw, Annex IV
ENGLISH
CS1825 H2 - GKC1825L H1
Charger (minutes)
90590287* N517388* BDC1A BDC2A BDC2A36
400mA 1A 1A 2A
225 90 90
225 90 90
300 120 120
300 120 120
380 150 150
600 240 240 120
750 300 300 135
X X X
X X X
225 90 90
380 150 150
)= 3.3 m/s², uncertainty (K) = 1.5 m/s²
h
Chainsaw
18
250
250
3.5
250
55
3.1
1.35A
25 X
45 X
60 X
60 X
75 X
X
X
X 90
X 110
45 X
75 X
15