Kohler K–6502 Guia De Instalacion página 6

Escutcheon
Valve Body
4. Installing Square Handles
Close the valves (hot = clockwise, cold = counterclockwise).
Position a gasket over each valve body.
Thread an escutcheon onto each valve body.
Fit a spline adapter halfway onto each valve stem.
Partially install each skirt assembly onto a spline adapter.
Check the skirt alignment. If further alignment is needed,
reposition the spline adapter until the skirt alignment is correct.
Fasten each skirt to a valve with a screw.
Snap an inset into each inset holder.
Thread an outer shell onto each skirt.
105601-2-AB
Gasket
6
Outer Shell
Inset
Screw
Inset Holder
Skirt
Spline Adapter
Kohler Co.