BEFORE YOU BEGIN
HOW TO USE THESE INSTRUCTIONS
Please read these instructions carefully to familiarize yourself
with the required tools, materials, and installation sequences.
Follow the sections that pertain to your particular installation.
This will help you avoid costly mistakes. In addition to proper
installation, read all operating and safety instructions.
NOTES
S
Observe all local plumbing and building codes.
S
Prior to installation, unpack the new sink and carefully
inspect it for damage. Return the sink to its protective
carton until you are ready to install it.
S
Inspect the waste and supply tubing; replace if
necessary.
CAUTION: Risk of personal injury or product damage.
Cast iron sinks are very heavy. Get help lifting the sink into
place.
TOOLS AND MATERIALS REQUIRED
S
Sealant
S
Safety glasses
S
Pencil
S
Tape measure
S
Putty knife
S
Plumbers putty
A
1007256-2-
ENAMELED CAST IRON SINKS
R
Español, Página 7
Français, Page 13
All information in these instructions is based upon the latest
product information available at the time of publication. Kohler
Co. reserves the right to make changes in product
characteristics, packaging, or availability at any time without
notice.
S
For a replacement installation, make sure the existing
cutout is the same size or smaller than the cutout for the
new sink.
S
Please leave these instructions with the consumer;
they contain important care, cleaning, and warranty
information.
S
This fixture is not intended for undercounter installation.
Kohler Company supplies an entire product line
specifically designed for undercounter applications.
S
Keyhole saw or saber saw
S
Drill (1/2" dia. drill bit or larger)
S
Adjustable wrench
S
Pipe wrench
S
Tubing cutter
SELF-RIMMING
E2001 Kohler Co.