Tools And Materials; Before You Begin - Kohler K–6502 Guia De Instalacion

Tools and Materials

Assorted Tape
Screwdrivers Measure
Plumbers
Drill Putty
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

Please read all instructions before you begin.
Observe all local plumbing and building codes.
Determine the spout location before valve rough-in.
Drill 1-1/2" (3.8 cm) maximum holes for the valves and a 1-1/8"
(2.9 cm) hole for the spout.
Provide an access panel for all installations.
For lever handles, a one-quarter turn counterclockwise closes the
cold valve; and, a one-quarter turn clockwise closes the hot valve.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
105601-2-AB
Adjustable Tubing
Wrench Cutter
Solder
Thread
Sealant
2
Propane
Torch
Kohler Co.