Installation - HEIDENHAIN MSE 1350 Instrucciones De Instalación

6. Installation

The safety of any system incorporating the use of this product is the
responsibility of the assembler or installer of the system.
Notice
Do not engage, or disengage any connections while the unit is under power.
Damage to internal components may result.
Data interface connections
Connecting a transducer
This product can be used with select Solartron, Tesa, Marposs and Mahr half-bridge and
LVDT transducers. Refer to the transducer documentation for maximum connecting cable
length.
To connect a transducer:
Verify power is removed from all power supply modules in the module chain
X X
Align the transducer cable connector notch with the module transducer connection
X X
notch
Insert the cable connector into the transducer connection 4 and tighten the cable
X X
connector by turning clockwise until it is snug
Interfaces
Power indicator LED
1
Network LED indicator
2
Transducer inputs: X41 ... X48
4
axis for LVDT and half-bridge
transducers.
5 13 Module connectors
4
Transducer connector
22