Kohler K-407 Guia De Instalacion página 5

1/2" Mixed
Supply Inlet
2. Install the Valve
CAUTION: Risk of product damage. Do not apply direct heat to
the transfer valve body. Excessive heat will damage the plastic
valve components and the plaster guard.
Install 1/2" copper hot and cold water supplies and connect them
to your mixing valve according to the manufacturer's instructions.
NOTE: Do not install the transfer valve upside down.
Route the 1/2" mixed water supply line to the transfer valve inlet
port location.
Solder the mixed water supply line to the transfer valve inlet
port.
Kohler Co.
Plaster
Guard
Finished
Wall
5 088037-2-B