Rf Gain - Menu: Rfgain; Roger Beep - Menu: Rogbp; Background Color - Menu: Color; Dim - Menu: Bright - Team Electronic TS-11VI Manual De Instruccion

TEAM TS-11vi English

RF Gain - Menu: RFGAIN

If the received signal is too strong, e.g. due to close proximity, it will be
distorted. The RF gain feature reduces the signal sensitivity. The higher the
value, the lower the signal's sensitivity.

Roger Beep - Menu: ROGBP

The automatic roger beep, which is transmitted automatically once the trans-
mission key [PTT] is released, confirms the end of the signal. There are 6
different tone sequences available.

Background Color - Menu: COLOR

For the LCD, there are seven different background colors available.

Dim - Menu: BRIGHT

Adjust the background color brightness with six different levels.

Time-Out-Timer - Menu: TOTSET

The time-out-timer limits the transmission time. Once the set time expires,
transmission is automatically aborted. This feature can be turned off.

Priority Channel 1 / 2 - Menu: EMG1 and EMG2

To quickly access the priority channel 1, press the priority key [EMG] once; to
get to the priority channel 2, press the key twice and to return to the original
channel, press the key a third time.
You can change the preset of both priority channels.

Reset - Menu: RESET

To reset the radio to the factory preset (look out for * (asterix) in the following
table), select the function, press the menu key [EMG] (4) shortly (the symbol
RESET will blink) and confirm by long-pressing the menu key [EMG] (4).
27