Rockwell Automation Allen-Bradley 2711P-RC2 Instrucciones De Instalación página 4

4 Compact Flash Cards
2. Insert the card in the card slot and push until the card is firmly seated.
• For the PanelView Plus 400 and 600 terminal, insert the card with
Allen-Bradley logo facing toward the display.
• For the 2711P PanelView Plus 700 - 1500 or PanelView Plus CE terminals,
insert the card with the logo facing away from the display.
ATTENTION
Follow these steps to install the memory card in personal computer:
1. Insert the card into the cat. not. 2711P-RCH, adapter with both Allen-Bradley
logos facing in the same direction.
2. Insert the assembly into the PCMCIA slot.
The card will appear as a new drive.
Remove a Memory Card
1. Press the Eject button above the memory card slot. When the button pops
out, press it again to release the card.
The PanelView Plus 400 and 600 terminals do not have an eject button.
Simply secure edge of card with your fingers and pull card away from slot.
2. Remove the memory card from the slot.
Publication 2711P-IN008C-MU-P - March 2007
Do not force the card into the slot. Forcing the card into the slot may damage
the connector pins.