Ecreso Fm 5Kw / 10Kw Quick Start Notice - Worldcast Systems ECRESO FM 5kW Guía Rápida

English version
ECRESO FM 5kW / 10kW
Quick start notice
1. Connections
1. Feed the audio input and interlock cables through the cable gland on top of the
cabinet
2. Connect the antenna to the RF output (1 5/8 flange connector)
3. Pull open the drawer to access the audio inputs and the interlock connectors.
4. Connect the interlock to the control unit rear panel
Network connection

We recommend using an armored interlock cable.
5. Connect the audio inputs as needed:
6. Before starting transmitter configuration, power the transmitter: turn on all switches from left to right on
the circuit-breaker located on the lower front panel of the transmitter.
4
Interlock
MPX/SCA1
MPX/SCA2
19 kHz
Audio input Line1
(Analog)
Audio input Line2
(AES)
Control unit
Drive(s)