Controls And Display - SEVERIN KGK 8943 Instrucciones De Uso

Controls and Display

The control is carried out by push buttons un-
der the display in the middle of the outside of
the cold storage door. If the cold storage door
is closed and no push button is touched within
3 minutes, then the display light goes out.
To activate it again, touch one of the push
buttons.
Fridge
Freezer
Function
OK
1 Display for cooling temperature
2 Display for freezing temperature
3 Symbols for special features
4 Push buttons for the control of the
appliance:
Fridge: Regulate the temperature
in the cooling room
Freezer: Regulate the temperature
in the freezer
Function: Choose special features
OK: Confirmation of input or
exit of menus
Regulate the Temperature in the Cooling Room
Tap the button 'Fridge'. If the display for the
cooling temperature blinks, then every further
tap on 'Fridge' changes the temperature by
one degree between 2 °C and 8 °C. If you
tap again at the setting of 8 °C, then 'OF'
illuminates and the cooling for this part of the
appliance is turned off.
ZeroBox
The ZeroBox serves as the optimal storage for
meat and fish.
VeggiBox
The VeggiBox serves as the optimal storage
for fruits and vegetables.
1
Regulate the Humidity in the VeggiBox
Fruits and vegetables easily decay when stored
wrongly. For that matter, a critical criterion is a
right humidity, which you regulate precisely for
2
the VeggiBox with the Humidity-Control:
This slide control is in the cover of the
3
VeggiBox. Is the slide control open, then the
humidity sinks; is it closed, then the humidity
rises. This allows for ideal storage conditions
for fruits and vegetables.
Regulate the Temperature in the Freezer
Tap on the button 'Freezer'. If the display for
4
the freezer temperature blinks, then every fur-
ther tap on 'Freezer' changes the temperature
by one degree between –24 °C and –16 °C.
Special Features
Tap if necessary several times on 'Function'
and subsequently on 'OK', in order to activate
the following special features. To deactivate a
special feature, tap the 'Function' button until
the symbol of the desired function gets illu-
minated. Then, hit 'OK'. The symbol lighting
goes out.
- 25 -