SEVERIN KGK 8943 Instrucciones De Uso página 24

Frigorífico combi
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 65
Installation measures
If the appliance is placed sideways on a wall,
you will leave a lateral gap of at least 60 mm,
so that the doors of the appliance can open
in a 90-degree angle. In order to be able to
remove the VeggiBox and the ZeroBox com-
pletely from the appliance, detach the bottle
compartment if necessary.
KGK 8943
Width (W)
Depth (D)
595 mm
A
B
1010 mm 1230 mm
Height (H)
642 mm
1855 mm
C
E
125°
30 mm
300 mm
Ventilation
The air warmed behind the appliance needs
to circulate freely. For this reason, the circula-
tion of air cannot be compromised.
Caution! Do not cover possible existing
ventilation openings in the back area of the
top cover plate!
Connection
• Before you connect the appliance, you have
to make sure that itself and the power plug
do not show any transport damages.
• Connect the appliance only to a shockproof
outlet. The mains voltage has to correspond
to the one stated on the tool identification
plate.
• The appliance complies with the guidelines
that are obligatory for CE marking.
• Do not connect the appliance to an inverter
• The power plug should not touch the back-
side, in order to avoid possible vibration
noise.
• The appliance can be put into operation by
plugging the mains plug into the point. Af-
ter this, the display lights up for 2 seconds,
and the appliance operates in 'ECO'-mode.
• A complete switching-off only occurs by
pulling the mains plug.
F
- 24 -
Tabla de contenido
loading

Tabla de contenido