Connecting The Telephone; Inserting The Battery - ClearSounds CSC48 Manual De Instrucciones

1 Connect the curly cord to the handset and to the jack on the left side of
the telephone.
2 place the handset into the cradle.
3 Connect the telephone line cord to the Telephone jack at the rear of the
unit.
4 Connect the other end into the telephone wall jack (using adapter plug if
required). You will hear a click when the modular plug is correctly in place.
Note: Peel the plastic label from your phone's display before using
your phone.
Before connecting your CSC48 to the telephone line, you should install
a AAA battery. The battery is required for the clock to function
1 open the battery compartment (located on the bottom of the phone)
with the small screwdriver or pen.
2 Insert the battery, always ensure that the polarity is correct.
3 Close the battery compartment
The battery must be changed when the clock display is no longer visible.
NOTE: Before installing or changing the battery make sure that your
CSC48 is not connected to the telephone line.
Hanging The Phone On The Wall
You can place your phone on a flat surface or mount it on a telephone
wall plate (not included).
1 To mount using an existing wall plate adapter.*
2 Connect one end of the short phone cord to the telephone wall plate and
the other to the telephone
3 Insert the supplied mounting bracket into the slots on the back of the
phone and push the bracket up until it clicks. To detach the bracket,
simply press the tab and slide down bracket down.
4 Insert the two keyhole slots on the phone with the wall plate and slide
the phone down, being careful not to pinch the telephone line, until the
phone is secure.
5 press and lift out the handset holder. Remove the hanging peg (located
by the switch hook) by pushing it upwards then rotate the peg 180
degrees, then snap it into place so it will hold the handset in place when
the phone is mounted on the wall.
*If you do not have an existing wall mount plate adapter they are
available at most major electronic and hardware retailers, simply
follow the manufacturer's instructions for installation.
SET-UP

Connecting the Telephone

Inserting the Battery

4 – ENGLISH