Troubleshooting; Storage; Disposal - Chicago Pneumatic CP 0006 Instrucciones De Seguridad Y De Funcionamiento

CP 0006, CP 0006 SVR, CP 0066
CP 0006 SVR
CP 0066
A. Torque: 35-40 lbf.ft (47-54 Nm), use Loctite®
542™. (Loctite is a registered trademark of
Henkel Corporation. 542 is a trademark of
Henkel Corporation.)
Torque: 50-60 lbf.ft (68-81 Nm), use Loctite®
B.
542™.
C. Torque: 60-70 lbf.ft (81-95 Nm), use Loctite®
542™.
D. Torque: 15-16 lbf.ft (20-22 Nm), use Loctite®
242™. (Loctite is a registered trademark of
Henkel Corporation. 242 is a trademark of
Henkel Corporation.)
Torque: 13 lbf.ft (17 Nm).
E.
Torque: 44-52 lbf.ft (60-70 Nm).
F.

Troubleshooting

If the scabbler does not start, has low power or
uneven performance, check the following points.
9800 0611 90 | Original instructions
Safety and operating instructions
♦ Check that the piston and cylinder are clean and
dry.
♦ Check that the compressed air system supplies
the machine with sufficient air pressure to give
full power.
Check the dimension and length of the air hose
♦
are according to the recommendations. See
"Installation".
♦ If there is a risk of freezing, check that the
machine's exhaust ports are not blocked.
If the machine function is still not satisfactory after
this procedure, contact an authorised service
workshop.

Storage

> Clean the machine properly before storage, in
order to avoid hazard substances. See "Dust and
fume hazard".
> Always store the machine in a dry place.

Disposal

A used machine must be treated and disposed of in
such a way that the greatest possible portion of the
material can be recycled and any negative influence
on the environment is kept as low as possible, and
in respect to local restrictions.
15