Assembly And Commissioning; Use - Glatz PIAZZINO Instrucciones De Montaje Y Uso

Assembly and commissioning

1
PIAZZINO
TEAKWOOD
2
3
4
PIAZZINO
TEAKWOOD
Unpack the sunshade
Supplied with:
- Sunshade, tie-rope (TEAKWOOD,
material class 5), top
- Operating instructions
!
Dispose of packaging materials properly
and keep away from children. Do not
install defective material. In case of dam-
age, please inform the transport service
provider immediately.
Placing the sunshade down
!
Carefully place the sunshade on a clean,
horizontal surface. The sunshade is very
heavy. Work in a threesome and hold the
sunshade securely.
Assembly
1. Screw top on end of the pole.
Setting up the sunshade
1. Place sunshade in base
2. Tighten the base tube clamp
minimum
weight
Size
[cm] [kg]
ø300 40
ø350 55
300 x 300 55
ø300 40
ø350 55
330 x 330 70
* maximum wind speed when it is securely anchored
in the ground.
22 23

Use

Locking pin
Instruction manual
1.2
maximum
wind speed*
[km/h (Bft.)]
30 (5)
2.1
30 (5)
30 (5)
30 (5)
30 (5)
30 (5)
1
Open sunshade
1. Remove any protective cover
2. Release binding belt / ribbon
3. Open parasol with the help of the
cable
4. Insert locking pin under slider
5. Relieve cable, wind up, hook in at the
slider
1.4
!
Make sure that the locking pin is fully
inserted.
1.3
2
Close sunshade
1. Tension the cable and remove the
locking pin
2.2
2. Close sunshade
3. Pull out / wrap fabric segments
4. Apply binding belt / ribbon
5. Apply protective cover if necessary
2.3
!
Only wrap / pack completely dry
sunshades.
Supporting struts
Slider
Cable storage
(TEAKWOOD)
Cable
Base (optional)