Adjusting The Multi-Touch Chassis Video Display; User Controls For On Screen Display; How To Use The Osd Menus - 3M Multi-Touch C2167PW Guia Del Usuario

8
 Refresh rate 60 Hz
 Color depth at least 16-bit (high color)

Adjusting the Multi-Touch Chassis Video Display

This section provides guidelines for adjusting the video display and using the display
controls to adjust the image to your liking. The controls for adjusting the video display
are located on the back of the Multi-Touch Chassis Display. These buttons let you
display the on-screen menu and adjust the phase, image position, contrast, and brightness.
Before you make any adjustments:

Be sure to adjust the controls in your normal lighting conditions.

Display a test image or pattern whenever you adjust the video.

User Controls For On Screen Display

Your Multi-Touch Chassis Display has five controls for adjusting the video display.
MENU
Key/OSD
Menu
Up
Down
Select
Power

How to Use the OSD Menus

1. Press the MENU button and press Up or Down button to select among the five
functions in the main menus.
2. Choose the adjustment items by pressing the Select button.
3. Adjust the value of the adjustment items by pressing the Up or Down button.
4. With the OSD menu on screen, press the Menu button to return main menu or exit
OSD.
5. The OSD menu will automatically close if you have left it idle for a pre-set time.
6. To Lock the OSD / Power menu buttons, please follow the instructions below.
(Please note: the monitor has to be turned ON with a valid signal pre-set).
a. Press Menu key, the OSD menu will appear.
3M Touch Systems, Inc. Proprietary Information –
UP DOWN SELECT
Menu Off Status Menu On Status
Menu appear Menu disappear/return to main item
Brightness Main item select up/Adjust up
Contrast Main item select down/Adjust down
Enter/Select sub-item function
Power On/Off
3M™ Multi-Touch Display User Guide
POWER
TSD-44310 REV C