Safety, Maintenance & Preparations - Excalibur EPV15 Manual Del Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SAFETY
For your safety, follow these precautions when using your Vacuum Sealer:
• Read Owner's Manual carefully before using the machine for the first time.
• Do not use the Vacuum Sealer on wet or hot surfaces, or near a heat source.
• Do not immerse machine or power cord in water or any other liquid.
• Plug Vacuum Sealer into grounded power sources only, do not use extension cord.
• To disconnect, unplug directly from power source. Do not disconnect by pulling on cord.
• Do not operate appliance with damaged power cord.
• If the machine is left unused for a long period of time, please remove the battery from
the handle.
• Please recycle waste batteries according to garbage classification standards, do not
discard them arbitrarily.
• Only use the Vacuum Sealer for its intended use.
• Only use Vacuum bags, accessories and attachments.
MAINTENANCE
• Unplug before cleaning.
• Clean appliance regularly with damp cloth and mild soap to remove crumbs, dust, debris.
• Chamber Seal Gasket is removable to clean any liquids that may have escaped from
Vacuum bag during process.
PREPARATIONS
• Plug in machine.
• When the machine is on, indicator light will turn green.
• Press "On/Off" button, digital displayer is on, fan starts. Now the machine is ready for
all cycles.
HOW TO MAKE A BAG FROM ROLL
1. Choose roll with a suitable width.
2. Put the open end of the roll across the seal wire (please make sure the open end is across
the seal wire); close and press the lid.
3. Press "Seal" button (or the quick-start button on the handle), seal time will count down to 0
from default setting, showing on digital displayer. After this cycle, the machine lid will open
automatically and beep.
** Press On/Off button to stop the machine's all working processes.
4. Take out the roll end and check the seal.
NOTE: A positive seal will look "clear" upon inspection. If the seal is spotty, incomplete,
wrinkle, white or milky, please cut the seal and restart the sealing process.
5. After end is sealed, measure bag to size of item, allowing 4.5cm of space and cut roll. Place
item in bag and follow "how to vacuum and seal with bags".
www.ExcaliburDIY.com
Professional Vacuum Sealer
5
Tabla de contenido

Solución de problemas

loading

Tabla de contenido