Safety Instructions - Flex ALC 2/1 Instrucciones De Funcionamiento Originales

Safety instructions

WARNING!
– Keep children away from lasers.
– Take suitable measures to prevent third
parties from looking into the laser beam
with optical instruments.
– Preferably aim the laser beam above
or below eye level.
– It is not permitted to tamper with or modify
the device. Do not disable any safety
devices and do not remove any information
or warning signs.
– Before switching on the device, check for
visible damage. Do not switch on damaged
devices.
– Have the device repaired by authorised
technicians only. If the device is opened
improperly, laser radiation may occur which
exceeds class 2.
– Do not use device in a potentially explosive
environment.
– When performing alignment work on ladders,
avoid an abnormal body posture.
Ensure that you have a secure footing and
keep your balance at all times.
CAUTION!
– Do not use the device in the rain.
– If the device is brought from a very cold
to a warmer environment or vice versa,
you should allow the device to acclimatise
before using it.
– If using adapters and tripods, ensure that
the device is screwed on tightly.
– Transport the device in the corresponding
carrying case only.
– If shipping the device or shutting it down
for a prolonged period, isolate the batteries
or take them out of the device.
FLEX ALC 2/1
11