ZANEEN EYES A1 Instructions De Montage página 4

EYES GROUND
RECESSED
INSTALLATION GUIDE
-Istallazione cassaforma da interrare- Ground Housing Installation
-Installation a la terre de la boitier
-Installations dem schachtel im ground
-Instalación de la caja en el suelo
I
GB
Prepare the hole for the housing with the insertion
of Ø20 mm. corrugated conduit with supply-cable.
Before installing the housing be careful
however to make underneath a layer for
drainage sufficient to gaurentee the water flow
Place the housing in the hole and place the
supply cable of the cable gland, placed on the
bottom of the housing then flush with the
finished floor
Connect the unit checking correct poliraties
(+RED and -BLACK) and place the unit in the
housing
N.B. The installer must provide watertight
connection to appropriate standards for
equipment for outdoor installation
Zaneen Group Inc. © 2021, T 1800-388-3382, F 416-247-9319, www.zaneen.com
In a constant effort to supply the best product, we reserve the right to change specifications or materials without notice. The most recent specification sheets are found at zaneen.com
I
GB
D
F
F
D
E
®
Page 4 of 10
loading

Este manual también es adecuado para:

Eyes b1Eyes b3Eyes a-9