Operation - Bego 335.00879 Serie Traducción Del Manual Original

English ⋅ Triton SLA
en
Connecting to supply of tap water

Operation

28
1. Fit seal with strainer (1).
2. Connect Waterstop valve and hose (2) tightly
to IN.
3. Mount cartridge (3) upright (leaving minimum
floor clearance of 30 mm).
4. Fit hose (4) to OUT. (Do not use metal pipe!)
Turn tap on and allow 2 or 3 litres of water to
flow through. Then connect hose to Triton SLA.
5. Plug the unit in (5).
1. Turn tap (1) on.
2. Turn switch (2) to
• boiler is filled with water (takes about
3 minutes, when finished "max" indicator
light comes on)
• water is heated up (
heating).
3. After about 15 minutes: Hold steam gun (3)
in a sink and hold trigger depressed until the
steam is emitted evenly.
4. The cleaner is ready for operation when the
reading on the pressure gauge (4) is about
3 bar.
.
comes on while