Troubleshooting - Kärcher DS 5.800 Manual Del Usuario

DS 6.000 Waterfilter
DS 6.000 Waterfilter, Mediclean:
HEPA filter H 13 class according to EN
1822 (effective 1998)
DS 5.800 Waterfilter:
HEPA filter H 12 class according to EN
1822 (effective 1998)
Subject to technical modifications!

Troubleshooting

You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
Appliance does not vacuum
Power supply is interrupted
 Remove the mains plug, check the con-
necting cable and the mains plug for
damage.
Weak/diminishing suction power
Forgot the baffle plate or not inserted
correctly
 Reinsert the baffle plate correctly.
(see: FILLING THE WATER FILTER
RESERVOIR)
Intermediate filter missing or not
inserted correctly
 Check the intermediate filter.
Intermediate filter is dirty
 Wash the filter, install new intermediate
filter if required.
(see: CARE, MAINTENANCE)
Intermediate filter is wet
 Let the intermediate filter dry or install
new dry filter.
(see: CARE, MAINTENANCE)
Strong foam generation in the water
filter reservoir
 Replace the water and add 1 to 2 cap-
fuls of FoamStop. Check the intermedi-
ate filter for moisture. If necessary,
clean the damp filter under running wa-
ter and allow it to dry afterwards or in-
stall new filter.
Too little or too much water in the water
filter reservoir
 Check the MIN / MAX marks on the res-
ervoir.
HEPA filter is soiled
 Replace the HEPA filter.
(see: CARE, MAINTENANCE)
Accessory is blocked
 Remove the blockage.
(see: CARE, MAINTENANCE)
False air slide at the handle is open
 Close the false air slide.
(see: WORKING WITH THE FLOOR
NOZZLE)
Appliance flap does not close
The cover of the water filter is not
properly installed
 Properly install the cover of the water fil-
ter container.
The water filter is not properly installed
 Remove the water filter and correctly in-
sert it into the appliance.
(see: FILLING THE WATER FILTER
RESERVOIR)
– 10
EN 17