Samsung Level over Sound AG900 Manual De Instrucciones página 7

Registering the device and
connecting via the Bluetooth feature
Connecting via the NFC feature
1
Activate the NFC and Bluetooth features on the other
device.
2
Turn on the device and place the other device's NFC
antenna near the NFC antenna area of your device.
Device connection is complete after you allow other
devices to connect to your device.
When the devices are connected properly, the
notification light flashes blue at regular intervals.
• NFC antenna area may differ depending on the
connected devices. For more information, refer
to the user manual of the connected device.
• Ensure that the screen on the connected
device is unlocked before connecting your
device. The NFC feature does not work when
the connected device's screen is locked.
Connecting devices manually
Before using the Bluetooth feature for the first time,
pair your device with other Bluetooth-enabled devices.
Once your device is paired, the recently-connected
device automatically connects to your device whenever
you turn on your device.
1
Turn on the device. Press and hold the Registration
button for about 3 seconds.
The device enters the Bluetooth pairing mode and
the notification light flashes red, green, and then
blue for 3 minutes.
2
On the Bluetooth-enabled device, access the
Bluetooth setup mode and search for Bluetooth
devices.
3
From the search results, select the device name.
When pairing is complete, the device's name appears
in the device list. When the devices are connected
properly, the notification light flashes blue at regular
intervals.
• The method for connecting via the Bluetooth
feature may vary depending on the connected
devices.
• You can connect to another device only after
disconnecting a previously connected device.
7