Cleaner Assembly Carton Contents; Attach Hose; Attach Handle - Hoover Nano-Lite Manual Del Propietário

If you need any assistance:
Visit our website at hoover.com. Click on the "Service" button to find the service outlet
nearest you OR
Call 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only) OR
Call 1-800-263-6376 to speak with a representative in our Consumer Response Center.
Please do not return this product to the store
1. Cleaner assembly
Carton contents
1-1
A

Attach handle

1-2
Press button (A) on back of handle
base and push handle down until
metal button on handle snaps out.
Press button (A) to raise and lower
the handle.
4
C
B
Position hose
1-3
A
The hose is packed in a plastic bag
for shipping. Remove hose from bag
before assembly. Position hose over
rack and into hose tube (B).
NOTE: Hose must be connected at
the hose tube (B) and at the dirt
duct (D) on the back of the cleaner
for carpet or floor cleaning. For
tool use, refer to Fig. 2-11 and 2-13.
.
D
B
A. Handle section
B. Cleaner
C. Crevice wand & dusting brush
D. Hose
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.

Attach hose

1-4
C
D
Align end of hose with projections
(C) over slots on dirt duct (D).
Slide hose into slots and twist hose
to lock it into place (To detach hose,
reverse procedure).