Bego Nautilus T Traducción Del Manual Original página 61

Nautilus T
Start preheating:
Stop preheating:
Precious-metal alloys
with
graphite ingot
Preheat until the first cast
pieces deform,
but do not melt.
Important! Do not preheat too long, because the alloy will otherwise melt and behave atypically
later.
Start melting:
Observe the melt!
when the last hard component is completely sunk into the melting bath.
Important: The movement of the melt is created by the magnetic field, not by the heat.
The moved melt is therefore not a boiling melt!
After the timer has elapsed, a signal sounds.
Once the melt is ready for casting according to a visual check, casting can be carried
out.
Operation
press button
press button
Precious-metal and Pd alloys
without
graphite ingot
Sprinkle a pinch of Auromelt
over the cast pieces! Preheat
until the first cast pieces
deform, but do not melt.
press button
Please press to start the timer,
Pd and NiCr alloys
Preheat until the cast pieces
glow bright red; the cast
pieces are still solid.
61