General Safety Instructions; Care And Maintenance; Safety Instructions - Bego Nautilus T Traducción Del Manual Original

The HF vacuum pressure casting machine Nautilus T is designed exclusively for casting
dental alloys, with the exception of titanium. Any other use is considered to be improper.
We shall not be liable for any damage resulting from improper use.
ATTENTION! Casting titanium is not permissible! There is a risk of personal injury and damage to the
machine!
During melting, alloys containing beryllium produce strong oxides that cause considerable wear to
the crucibles and remain there in significant quantities. CAUTION! When beryllium is processed,
carcinogenic particles are released. Wear mouth protection and ensure good suction extraction when
casting and finishing!
The safety instructions must be followed in order to avoid personal injury or damage to equipment. We
shall not be liable for failure to comply with the safety instructions

General safety instructions

l Place of use
The unit has been designed solely for use in dental laboratories and comparable establishments for
research, commercial and training purposes. • The unit may only be installed on an adequately stable
surface. • The unit must only be used in dry rooms.
l Operator and operating personnel
The unit must be operated solely by trained dental professionals. • Wear the protective clothing
prescribed for use in dental laboratories and observe the rules of conduct. • The unit may only be
operated by staff members who are familiar with and follow the instructions of this operating manual. •
The operating manual must be easily accessible when the machine is operated. • Observe the national
accident prevention regulations in addition to this operating manual.
l Handling the machine
Prior to connection to the power supply check whether the specifications on the rating plate correspond
to the supply network. In the case of uncertainty, consult an electrician. • The unit is categorised under
protection class 1 and may only be connected to properly earthed power sources (earth contact
sockets). • Modifications of the machine are not permitted. • Always keep signs and stickers such that
they are easy to read. They must not be removed. • Check the machine and leads for damage regularly.
The machine must not be operated if it has any defects that may result in risks for the employees or third
persons. • Protect the leads against heat, oil and sharp edges. The leads must not be used to carry the
machine or to pull out the mains plug.
l Care and maintenance
Always switch off the machine and pull out the mains plug before performing care, cleaning or
maintenance work. • Only use dry or slightly moist cloths for cleaning. Do not spray the machine with
water or immerse it in water.
l Repairs
Repairs may be carried out solely by BEGO customer service or by persons authorised by BEGO
customer service. • Metallic housings must be grounded properly so as to prevent them from carrying
current. Otherwise they are extremely dangerous because the housings may be live due to damage to the
machine! Since a check to ensure a de-energized state is mandatory every time the machine is opened
(Germany: check in accordance with DIN VDE 0701-1), only qualified electricians may open the
machine! • Only BEGO replacement and wearing parts may be used.
18

Safety Instructions

Nautilus T
.