Tabla de contenido
Installing SteelHead Product Family Appliances (English)
The appropriate console cable ships with your appliance.
Make sure the Console port settings are 9600, 8 data bits, no parity, 1 stop bit, no flow control.
Start your terminal emulation program (for example, HyperTerminal or Tera Term Pro).
At the login prompt, type admin. The default password is password.
5. Configuring the SCC
The configuration wizard automatically starts when you log in to the command-line interface for the first
time.
Follow the prompts to configure network and in-path interface settings for the SCC.
Confirm your settings; then type exit to log out of the appliance.
6. Connecting the SCC to Your Network
Make sure you use the correct cables to connect to your network:
–
Straight-through cables: Primary and LAN ports to LAN switch.
–
Crossover cable: WAN port to WAN router.
Plug the straight-through cable into the Primary port of the SCC and the LAN switch. The primary
port can be any port on your LAN switch that is configured to connect to a host.
7. Checking Your Connections
Check the LED status lights to verify that the appliance is connected properly.
Connect to the CLI. At the system prompt, enter the following command:
ssh [email protected] or ssh admin@ipaddress
At the system prompt, enter ping commands to verify the connections. For example:
12
Installing the SCC
Getting Started Guide
Tabla de contenido
